jusy curious, what triggers ISDN to dial? Normally, you need a floating static route pointing to the isdn interface and appropriate dialer-map and dialer-list to trigger the dial. The ISDN interface wouldn't start dialing on its own. Some "interestin...
This sets up a route to a specific host. What this is typically used for is to route traffic for one particular host differently than other hosts on his subnet. For example:ip route 10.1.0.0 255.255.255.0 10.2.1.1ip route 10.1.0.11 255.255.255.255 10...
Depends on what you mean by "pass all the VLANs using 802.1Q to the 3com." If "pass all the VLANs using 802.1Q to the 3com" means creating vlans on the 3550 and expect them to show up on the 3com, then it will not happen. 802.1Q is a trunking protoco...
Merging two OSPF networks together (be it via a virtual link or directly merging the area 0s) requires complete understanding of the two OSPF ASes. I would no recommend using virtual links as virtual links are resigned to connect an OSPF area to area...
Adrian, only fast ethernet ports support trunking. As far as I know, none of the 2500 series routers have the hardware or software to support trunking. You need a 2651 at least. If a 2500 is all you have, this what you can do:1: Combine the two vlans...
