Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have two VLANs each with a different subnet.We'll call them VLAN A on 192.198.0.1 and VLAN B on 192.168.16.1.We have to maintain the network isolation for PCI (Credit Card compliance), but I have a server on VLAN A, 192.168.0.45 that computers on b...
Hello,first time to the forum.I have 3 24-port managed switches. I can telnet (I know not preferred off SSH) into all 3. We've been told I have to put some people on a separate VLAN. I'm trying to track down which machine goes to which port so that...
Here is one of the routers: route table.I would think I just neet to add a route to the 192.168.32.1 subnet out the 0.0.0.0 default gateway.But it won't let me in the web gui nor by command line.FYI: There is no 192.168.5.0 in my network, but the i...
All 3 VLans exist on all three routers.Here is switch 2:If you look at the above topological map view way up above, there are two exit paths for the network.VLan 1 Default goes out the Total Acces Adtran router. Its interface gateway is 192.168.0.1....
Thanks for the suggestions.I was away last week on an emergency.I tried your suggestion today. I put the server on its on VLAN and its own subnet; but I can't ping it.I think there is a problem with the route table.VLAN configuration on Switch 1:Swi...
Great.So I don't want to route between 192.168.0.1 and 192.168.16.1. (the whole network)I only want to route between 192.168.16.1 and 192.168.0.45. (just the one server)Is there a way to configure a route on switch 1 from 192.168.16.1 subnet to 192....
