Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Prior to implementing blocking (FirePower ASA currently set in passive mode), I need to provide a custom block page. Ideally this would include a company logo and some text indicating why the page was blocked. The documentation is somewhat light on ...
Well, the differences are not that large. Onedrive is 10ms faster but even at 24ms RTT with a 64K TCP window size you should be capable of achieving in excess of your 15 mbps up link speed.
Note that PSPing shows a max throughput of 2.52 MB/s. I'm ...
The 5506X is a perfectly good device for the bandwidth you are dealing with. You have a 75/15 so the maximum throughput you can ever expect on your VPN is 15 mbps. Since you have a next gen firewall, one can expect you are using Sourcefire IPS. Ev...
Your link is not available outside your UT environment. So putting on the magic guessing hat I would troubleshoot as follows.
1. Prove connectivity between your 2 VPN devices. This can be accomplished with a ping. No connectivity is likely a routi...
You have discovered:
CERM (Cisco Export Restrictions Manager).
Try <show platform cerm-information> to prove it.
Now the good stuff. You have an opportunity to render unto Cisco licensing! You need to purchase what Cisco calls an HSEC-K9 license in...
Just a stray thought.
After you clear the tunnel, rather than bring it up with a ping from a workstation inside somewhere, try bringing it up with packet tracer.
packet-tracer input inside icmp <IP> 8 0 <destination>
That way you can be assured tha...
