分享Cisco ASA防火墙设备常用基线配置，目录如下： 配置步骤1：HA配置（主墙 & 备墙）配置步骤2：接口配置配置步骤3：路由配置(以静态为例）配置步骤4：object配置配置步骤5：object-group配置配置步骤6：访问控制列表配置配置步骤7：地址转换配置配置步骤8：管理配置配置步骤9：准入配置配置步骤10：网管配置   配置步骤1：HA配置（主墙 & 备墙） 步骤说明配置命令命令用途解释常用检查命令HA配置（主墙）interface Redundant X member-int...

CISCO ISR4431路由器ISE AAA认证顺序问题， 配置了两个ISE AAA服务器，一个是ISE1服务器，第二个是ISE2服务器。现在问题是ISE1服务器正常，但是每次通过AAA账号登录，ISR4431路由器总是去ISE2服务器请求认证，只有把ISE2服务器关闭后才会走ISE1服务器认证，请问原因，希望是优先走ISE1服务器认证

1、Cisco Nexus switch LOG日志分析（通过show logging onboard internal reset-reason查看Cisco switch log日志即可发现如下log原因）Last log in OBFL was written at time Thu Apr 23 20:05:52 2022 Reset Reason for this card: Image Version : 12.2(4r) Reset Reason (...

Dear ALL,  When I configure CISCO ACI, create a new bd, and when vrf is selected, I cannot continue to submit, and the following error is reportederror 400 invalid configuration : subnets with matching ips cannot have diffierent scopes:172.28.177.254...

In the ACI environment, server A can ping the real physical NIC IP of server B, but cannot access the virtual IP of server B's BOND binding port.After manually binding A's MAC on the B server, A can access it normally. How to solve this problem, than...