Hi Maxime,
You will see the difference when the client wakes up and re-associates at time X + 14400s(user idle timeout), this time the client has to reauthenticate. That way you will understand the usage of sleeping client.
Thanks
Sreejith
Hi Diana,
If you are running 8.8 image on Mobility express, we do have an option to change the vrid on mobility express itself.
Below is the command to do the same.
config mob-exp vrid <new vrid>
Please try the same and let me know if this he...
Hi Mate, If you are running image (Cisco IOS XE Release 3.7.0E) and above, you can have centralized management set up where MC will push all the config to MAs. That way you don't have to configure all wireless config separately on each and every MAs ...
Hi All,
For both 2800 and 3800 aps, below is the power requirement. Please make sure these are there in the uplink switches to which these aps are connected.
Thanks
Sreejith
Hi Mate,
Any possibility of testing this in 8.3 latest as the release notes of 8.3.122.0 says apple devices are tested.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/release/notes/crn83mr2.html
Also, can we make sure we are following a...