Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I upgraded a pair of 65xx switches and I received "*LOOP_Inc" on a few of the vlans. Is there a 'better' way to fix this error other than taking the vlans off and then putting it back on again? Pretty much the commands I did are:sho spanning-tree i...
Im having issues connecting my PIX 501 through another company's 3030 to reach their FTP server. The specifics are: remote company outside (peer ip adx) 192.x.3.10local host : 164.72.181.24ipsec settings:3desgroup 2espsha1-hmacIPSEC SA Forced key ex...
Yes... usb to ethernet will not do anything for you. You will need to buy a usb to serial (db-9) connector. The only trick is that the com port will not be the standard com 1 and that is based upon the setup that comes with the connector.
Im not sure what you are really asking but you can configure most scenarios with what you have. The linksys is moot and the pix will help very little unless you are going on for security. Depending what type of 3500 you have... for example 3550s......
To answer your question in two parts... "Now the question is all the ports on the 2950 are going to be on the same subnet 192.168.131.64/26" Yes, all the ports on the 2950 will be the same vlan if you do not setup a trunk port between the 4500 and th...
