Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have an issue that I and my colleagues have been trying to figure out. We have three Catalyst 4500 series switches in service, and they are all configured with DAI (which includes/requires DHCP snooping). While doing some sample sniffs on our VLAN...
Mikael,Yes, we're seeing the traffic being broadcast out on all ports for that VLAN on the other switches that the host is not connected to. I did refer to the link/document you've provided, but we've been able to rule out two of the three potential...
OK, an update....Continuing to investigate this and found that this is NOT limited to hosts with a static IP address. It appears that this might be an IOS code issue.All three 4500 series switches are running v12.2(53)SG.Is anyone else out there wi...
I would go into config mode on all of your switches and set a password for VTP.vtp password (hidden)I would also check and make sure all switches are set to the same VTP version, it appears your VTP server is using VTP v2.vtp version {1 | 2 | 3}
