Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
HelloI'm facing a problem with two vlans.Each vlan has internet access by NAT.In each vlan there is at least one server, who should be accessiblefrom the other vlan and vice versa.The function "same-security-traffic permit inter-interface" doesn't wo...
Hello everybody,I'm new in the interesting world of cisco.I've spent some days to find out, how to deploy a cisco 836 ADSL over ISDN router with briding functionality, to do site-to-site vpn with a asa5510 behind the cisco 836. At the other side of t...
I'm sorry for the confusions.I have created a Vlan 6 on the ASA and also on the Switch.The Vlan 1 now is the native Vlan.actualy it looks like this:interface Ethernet0/1.11 vlan 11 nameif vlan11 security-level 100 ip address 192.168.1.254 255.255.255...
Hello Jennifer,thanks again for answering.Your explanations lights up the things !****Just a few explanations to my statements above:At eth0 of the ASA there is a L3-switch on Gig 0/1 directly connected. The Gig 0/1 is in trunking mode. Vlan 1 has t...
Hi Jennifer,as I've tested configuration I realized that I can't ping vlan 1 (192.168.6.6) from the L3-switch attached to the ASA.As I moved the Config to vlan 6 -it worked again.The main issue, the routing still doesn't work. I can't access resource...
Hi Jennifer,thanks for your quick answer.There must be something wrong with those static NAT statements, because after I've typed in those, I can't access theInternet anymore - on all Vlans.I can't see the reason - do you have an idea for this behavi...
I'm trying to ping from vlan11 (192.168.1.2) tp vlan1 (192.168.6.1)The firewalls on the access hosts are off.esult of the command: "sh run": Saved:ASA Version 8.2(2) !hostname ASAHYenable password encryptedpasswd encrypted namesname 192.168.6.1 SRV...
