Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am trying to upgrade my ASA 5580-20 from 8.1.2 to 8.2.2 through the ASDM wizard. I get the following error: Server returned HTTP response code: 500 for URL: https://10.0.0.2/admin/disk0/asa822-k8.bin. I haven’t been able to find out what that error...
I am running a bridge from a 1231g with a yagi antenna to a 1310g with the built in antenna. The distance is only about 400?. I have a security camera on the Ethernet port of the 1310. The problem I am running into is that we lose the video from the ...
We are trying to use a Linksys VPN broadband router to test some IP phones at home. We are connecting to a 3015 concentrator which authenticates the user with a Cisco Secure box. That Cisco Secure box also gives out and IP address. I have not found a...
I would like to gather NetFlow stats from the fiber interface to my PIX. What is the non-route command for a layer 2 interface? I am picturing the command on the 6513 side.
We are running a Tandberg setup and we frequently connect to Polycom systems. So I had to open ports for both systems depending on who negotiates the handshake. Here is what I opened on our 535object-group service Tandberg_tcp tcp description Video...
