About guxianghong

guxianghong · 04-01-2010

I want to monitor fa1/0/19's traffic to fa1/0/13 by RSPAN.My configuration is as follow, but I can't capture packets on interface fa1/0/13, please give me some help, thanks.========interface FastEthernet1/0/13 switchport trunk encapsulation dot1q swi...

guxianghong · 04-01-2010

I tried you config, but it still can't work.See my config:===========interface FastEthernet1/0/7 switchport access vlan 234endinterface FastEthernet1/0/8 switchport access vlan 222endmonitor session 1 source interface Fa1/0/8monitor session 1 destina...

guxianghong · 04-01-2010

The config guide you sent is for local SPAN.I know that local SPAN does have to configure destination interface, but how to configure RSPAN's destination port on RSPAN source session switch?Or we don't need to configure RSPAN's destination port on RS...

guxianghong · 04-01-2010

Thanks for your reply.I read RSPAN configuration again,On RSPAN source session switch, the example configuration is:----------------------This example shows how to create RSPAN VLAN 901.Switch(config)# vlan 901 Switch(config-vlan)# remote span Switch...

guxianghong · 04-01-2010

Thanks for your reply.Yes, local SPAN can work on my switch.But Here I want to use RSPAN, I configure the switch just follow the configuration guide, but there are no packets monitored.The configuration guide says RSPAN just need to configure destina...

Member Since	‎04-01-2010 01:04 AM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	5

User Statistics

User Activity

RSPAN can't work on my 3750, Why?

Re: RSPAN can't work on my 3750, Why?

Re: RSPAN can't work on my 3750, Why?

Re: RSPAN can't work on my 3750, Why?

Re: RSPAN can't work on my 3750, Why?