About steffenhansen93

steffenhansen93 · 12-09-2021

Hi I'm running a bunch of 9200L switches (16.12) in an ISE deployment(2.7). The Win10 company machines uses machine certs to validate via dot1x. The switch ports has a default port template with the corp vlan 30 as access. If a non corp device like n...

steffenhansen93 · 03-10-2021

I'm setting up a FPR1140 FTD 6.7, which is managed with on box Firepower Device Manager, for BGP routing. However I can't seem to find a way to configure "soft neighbor reset". The classic soft-reconfiguration inbound command does not seem to be supp...

steffenhansen93 · 12-13-2021

Hi PeterBut if I remove 20 authenticate using mab priority 20, mab never starts after failing dot1x. As you can see in me 2nd config example I tried this and hoped mab would start with the event authentication-failure match-all. However it does not..

steffenhansen93 · 03-11-2021

Hi Marvin Yeah I thought so. My BGP peer is an Azure gateway so I can't really do much there. But at least some clarity. Looking forward to 6.8 then  Thanks!

Member Since	‎05-02-2018 03:18 AM
Date Last Visited	‎12-15-2021 05:50 PM
Posts	4
Total Helpful Votes Received	5

User Statistics

User Activity

Dot1x and mab sequence error causing delayed login for Win10 machines

How to soft reconfig BGP neighbor FTD 6.7 FDM managed

Re: Dot1x and mab sequence error causing delayed login for Win10 machi

Re: How to soft reconfig BGP neighbor FTD 6.7 FDM managed