Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,
I have a connection from an ISP provided by a mode connected to my router and ISP was Providing 1 public IP, also I've an ASA behind the router and everything was cool.
I requested 4 more public IPs so I have now 5 to NAT to internal 5 WEB Server...
Hi,
I’m having an ASA 5505 and I’ve added a Deny rule in the outside_access_in group which block a group of IPs to reach my ASA and internal network. My ASA was connected to the ISP Directly, now the ISP changed the modem and I had install a new rout...
Hi,
I have a router C881-k9 connected on wan port fastethernet4 to the ISP modem, which provide internet with 1 public IP address and I’ve been asked to configure the following to get the internet working from my LAN:
Wanip2 is assigned on fastethe...
Hi,It is fixed for me:- just download the .bin file to flash memory - connect it to switch - in Rommon type “emergency-install usbflash0:/cat9k......bin” most probably u have 2 usb ports one from front and one from back the front one is usbflash0 and...
I'm facing the same with 9500I'm not able to boot from usbflash0: and not able to copy bin file to flash: or bootflash: as they are ro (read only)did you get the chance to solve it?Thanks
