Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello
We have two wireless controller still running some old software. A couple years ago, the decision was made not to continue running updates due to a couple issues.
1. The Cisco APs (Airnote 1200)
2. We do not have a current Cisco Tech Support c...
Hi
I am trying to create a simple access-list rule that restrict an external subnet to ping to any host behind the firewall.
The rule is access-list outside-access_in permit icmp host 172.2.1.2 any
The rule loads without no issues. But, the external ...
HiI just made a simple change on my firewall and my static ip rules got change. This is the current configuration.object-group network administrative-servers network-object host 171.31.53.17 network-object host 171.31.53.195 network-object host 12...
I have a computer behind the ASA 5505 firewall. The computer needs to access Microsoft Activation Server. Reading some website information, I need to allow a huge list of servers that basically points to www and https traffic. Therefore, looking at t...
Hello,I have created a simple static ip address by using this command:interface Vlan1 nameif inside security-level 100 ip address 10.2.1.1 255.255.255.0!interface Vlan2 nameif outside security-level 0 ip address 152.18.75.132 255.255.255.240access-li...
Thanks for the fast reply. But, as it is now, the computer behind the firewall is not able to connect to www.microsoft.com or to get windows updates, and or to activate windows.So, I think there is got to be something stopping from allowing this co...
I have two issues, and you can help to decide here. First, the firewall outside interface ip is 132 which knows how to get to the gateway. Second, in the previous version 7.3, a technician asked me to create a static address 133 which could be used f...
