Hi Everyone, I have a cisco router 1721 with 3 ethernet connection. 1 for LAN. 2 for Wan (Both with static ip address). Can someone help me? I have most of it program, but missing some commands. Here is what I have. Please Help! ip name-server 216.16.193.251 ip name-server 216.16.195.2 ip dhcp excluded-address 192.168.150.1 192.168.150.149 ip dhcp excluded-address 192.168.150.181 192.168.150.254 ! ip dhcp pool test network 192.168.150.0 255.255.255.0 domain-name bcs-ip.net dns-server 192.168.150.248 192.168.150.249 default-router 192.168.150.254 lease 7 ! ip cef ! ! ! ! interface Ethernet0 description att dsl ip address 99.99.xx.xx 255.255.255.248 ip nat outside half-duplex ! interface Ethernet1 description cable Internet ip address 98.98.xx.xx 255.255.255.248 ip nat outside half-duplex ! interface FastEthernet0 description cisco test lan ip address 192.168.150.254 255.255.255.0 ip nat inside speed auto half-duplex ! router rip network 99.0.0.0 network 98.98.0.0 network 216.16.200.0 ! ip default-gateway 99.99.x.x ip nat inside source list 1 interface Ethernet0 overload ip nat inside source list 2 interface Ethernet1 overload ip classless ip route 0.0.0.0 0.0.0.0 99.x.x.x no ip http server ! access-list 1 permit 192.168.150.0 0.0.0.255 access-list 2 permit 192.168.150.0 0.0.0.255 banner motd ^CDO NOT MESS WITH THIS ROUTER UNLESS YOU KNOW WHAT THE HELL YOU ARE DOING AND THAT YOU ARE AN EMPLOYER OF CISCO TEST^C ! line con 0 password XXX login local transport preferred none line aux 0 password XXX login local transport preferred none line vty 0 4 password XXX login local transport preferred none ! no scheduler allocate ! end ciscotest#
... View more
