Hi all, I am really confused often listening to these terms. Can any one pls explain me these things and their diff. I'd be so glad if u can explain me simply.Thanks!
hi all, I have enabled ospf between my core and dis switchesin lab setup. i have used /30 addressing. i have assigned vlan 1 ip in all core and dis in 30 range. ospf routing is happening in 10 and 20 network.Now from my DIS switch i am not able...
hi all, Please open the attached topology.Goto Access 1 - ping 30.1.1.1 ( vlan management IP of CORE 1 ) not pinging & no other management IP for all other switches are also not pinging. I am not able to ping the management IP from DIS switch ...
hi all, Is it possible to create L3 links between 3560 and 2950 switches? I can make the ports in 3560 as 'no switchport' and give it an ip. what would i do in 2950? This setup is for lab practice.If it is possible means, pls explain the proces...
Hi all, I have the setup which consists of two core and 4 distribution switches, and 4 distribution switches is connected with both core switches in redundant links.First of all let me tell u what ever concepts i have, if wrong please correct ...
hi jon Yeah i've used ip address in the ports.this is the output of sh ip route in core1Gateway of last resort is not set 10.0.0.0/30 is subnetted, 5 subnetsC 10.1.1.0 is directly connected, FastEthernet0/1C 10.1.1.4 is directl...
hi reza, thanks for the info!! Yes DIS switches are capable of running L3. I want to make the routing for vlans to vlan's to happen in DIS and internet traffic only must cross CORE. how can i accomplish this pls ?