Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Only on HP-UX and Solaris? I was hoping that the director would run on FreeBSD as we have one old sparc workstation here and no HP-UX. Can everyone let me know what they have successfully ran the Secure IDS Director on? Thanks a ton!
also....Note that the difference between using nat 0 with specifying network/mask vs. using an access list that use of network/mask permits initiation of connections from inside only. Use of access lists permits initiation of connections by inbound o...
nat 0 command disables NAT for a specific address/subnet... if you have a DMZ and internal interface and you don't want any translations to occur, this is how you would do it.
You'll need some kind of Radius or TACACS+ server to send the authentication requests to the Domain... SecureACS can do both of these. Windows 2000 has a built in radius server that you could look at. I don't know enough about security to answer yo...
In the login name... put the name of your nt domain then a \ , then the username: Like so: ics\justleror ntdomain\peter... 9x doesn't really support domain joining like NT and 2000 do. Although, you can tell it to join an NT domain... the securit...
Ah, looks like CSPM runs around $10k or so... Much cheaper than buying a sparc and OpenView. Thanks a lot for your help marcabal, I really appreciate it. I much more prefer a windows interface for this kind of thing, especially since we have tons ...
