Hi all, We are implementing ISE on different locations with different endpoint groups. Every type of endpoint is staticly assigned to one of the groups.For now we are looking for another solution.In one of the locations has many different departments...
Hello Guys, we're facing issues with cisco ISE in combination with our Alcatel-Lucent Phones.When we're apply the default ISE config a couple of phones keeps rebooting. The problem occuers at different phone types See the default config below:on the ...
Hi all, I've tried a few things for monitoring etherchannels, and invidual ports. but it wont work. Could someone help me with monitor these uplink ports? so i've get an mail once the are flapping or down.I've also tried to go to monitor-->monitoring...
Hello,
Could someone help me?
I am stuck on this.. i want to reset the password, but also after a reboot of the ISE server it wont work
Does anyone have suggestions?
Regards.
Hello All,
we're facing issues with the CoA from an ISE server.
When we want to do a change for authorisation we're getting failures in ISE and on the switch.
on ISE we're getting an failure:
11213 No response received from Network Access Device a...
Hallo Paul.
Thanks for your reply.
We've doing a Proof of concept. So we checking all the features en what works for our company.
For now we want to do the provisioning portal. But for later production use. W e want to do it by sccm.
Also our thin ...
i work in a Health Company,
and some of our walloutlets can be used by guest. in that case we want to make sure that the voice vlan is blocked.
When an other Device connects (From our company) we would like the voice vlan is available.
hi,
Thanks for your reply.
The brand of the phones is Alcatel-Lucent. with different models.
The switchconfig:
switchport mode access authentication host-mode multi-auth authentication order mab dot1x authentication priority dot1x mab authent...
