Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello, I bought Cisco C9200L-24P-4X switch connected the switch in my existing network VTP configured, shows the Vlan in my L3 Switch, broadcast is happening in all Vlan, bu i am not able ping the Switch IP
Hi All,PLease find the details,Layer 3 Core Switch 3850 - 172.30.1.2 - Vlan 1,By default when i configure new switch, I will connect the uplink of theswitch in Trunk port.Existing Gateway & Vlan,Vlan 12 - 172.17.1.100, Vlan 5 - 10.5.5.1,Here i connec...
Hi,I will check on the default Vlan status and i can ping Vlan 1 IP ranges, (All Switches, i can telnet this switch from other switches)For ex - Vlan 3,4,5 is created in Core and if i give this IP in this switchit is broadcasting.
Switch#sh running-configBuilding configuration...Current configuration : 8625 bytes!! Last configuration change at 07:11:52 UTC Sat Nov 30 2019!version 16.9no service padservice timestamps debug datetime msecservice timestamps log datetime msecservic...
Hi,Interface vlan1 IP and Gateway configured, not able to ping from mydesktop or other vlans, Only Native Vlan of the switch is getting ping,Tried pinging the gateway of other vlans nothing worked.
