Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,
I have an issue that I do not understand. In my SRv6 backbone I received vpnv4 routes correctly on the NCS540 (ver 25.2) but these routes are not pushed into the VRF table, meaning that the CE does not receive any of those routes. On the contr...
Hi,
I allow mtself to contact the community because I am facing an odd issue, I have a backbone (for LAB purpose) in SRv6 with IS-IS as IGP and multivendor one (Cisco, Juniper and Nokia).
I am unable to have a L3VPN SRv6 running between Route Refle...
Hi Harold,
I just come back to you to confirm the bad format sent by remote PE, it was really configured to use SRH instead uSID.
Extract to confirm:
VRF routing table:
RP/0/RP0/CPU0:SP5-PE5#sho route vrf C1-SRv6-L3VPN Wed Mar 11 08:17:25.225 UTC
Co...
Hi Harold,
Many thanks for your light. The remote PE is an ACX7024 (Juniper). indeed, the ACX is not configured to perform uSID, SRH instead only. I will take time to fix this misconfiguration.
Thanks.
Julien
Hi Harold,
Thanks for ur reply.
It is a lab to test the NCS540 capabilities in SRv6 to propose it to our customer along side with other vendors device. This lab consist of interop with ACX7024 (Juniper) in the SRv6 and will test interop with ASR1006-...
Hi Harold,
This is the output of the command:
RP/0/RP0/CPU0:SP5-PE5#show bgp vrf C1-SRv6-L3VPN 10.0.4.0/31 detail Tue Feb 17 16:10:49.402 UTCBGP routing table entry for 10.0.4.0/31, Route Distinguisher: 10.5.128.5:3Versions:Process bRIB/RIB SendTbl...
Hi Flavio,
Thanks for your reply but I have no such option of the command "show bgp vrf C1-SRv6-L3VPN rib-failure", I mean rib-failure on the NCS540.
RP/0/RP0/CPU0:SP5-PE5#show bgp vrf C1-SRv6-L3VPN ?A.B.C.D IPv4 networkA.B.C.D/length IPv4 network a...
