Hello Abbas, Since hosts from both the LAN side are pingable. So first you should try for extended ping i.e 1. From R1 :- R1 LAN Interface as source address and destination as R2 interface facing towards towards R3. 2. From R1 :- R1 LAN Interface as source address and destination as R3 interface facing towards towards Firewall. 3. From R1 :- R1 LAN Interface as source address and destination as Firewall WAN interface (External). 4. From R1 :- R1 LAN Interface as source address and destination as Firewall LAN interface (Internal). If you follow the above sequence, then you will come to know the actual follow of packet and then what needs to be done next. Do post with your result. Cheers !! shekhar.
... View more
Hi, I have configured PBR on my 1800 series router, it is working perfect. Now I am changing my router from 1800 to 2901 router with the same config, so the PBR stop working and I am not getting hits in the second WAN interface. The config is quite simple, Kindly help: Configuration: =========== interface FastEthernet0/0 description INTERNET # 2 ip address 203.xx.x.xx 255.255.255.248 ip nat outside ip virtual-reassembly duplex auto speed auto ! interface FastEthernet0/1 ip address 172.16.1.1 255.255.255.240 ip nat inside ip virtual-reassembly ip policy route-map zee duplex auto speed auto ! interface Serial0/0/0:0 description INTERNET #1 Internet ip address 221.xx.xx.xx 255.255.255.252 ip nat outside ip virtual-reassembly ! ! ip nat inside source list PTLink interface Serial0/0/0:0 overload ip nat inside source list Superlink interface GigaEthernet0/0 overload ip nat inside source static 172.16.1.11 203.xx.xx.xx ip nat inside source static 172.16.1.14 203.xx.xx.xx ! ! ! ip access-list extended PTLink permit ip host 172.16.1.13 host 221.xx.xx.xx permit ip host 172.16.1.6 any ! ip access-list extended Superlink permit ip host 172.16.1.13 host 203.xx.xx.xx permit ip host 172.16.1.13 host 203.xx.yy.xx permit ip host 172.16.1.13 host 203.xx.zz.xx ! ! ! ip access-list extended test_PT permit ip host 172.16.1.2 any permit ip host 172.16.1.14 any permit ip host 172.16.1.7 any permit tcp host 172.16.1.1 eq 7778 any permit ip host 172.16.1.10 any permit ip host 172.16.1.6 any ip access-list extended test_SUPER permit ip host 172.16.1.8 any permit tcp host 172.16.1.11 eq smtp any permit tcp host 172.16.1.11 any eq smtp permit tcp host 172.16.1.11 any eq domain permit ip host 172.16.1.11 any permit tcp host 172.16.1.5 eq 7778 any permit tcp host 172.16.1.12 eq ftp-data any permit tcp host 172.16.1.12 eq ftp any permit tcp host 172.16.1.12 eq www any permit tcp host 172.16.1.12 eq domain any permit ip host 172.16.1.12 any permit icmp host 172.16.1.13 host 203.xx.yy.xx permit icmp host 172.16.1.13 host 203.xx.xx.xx permit ip host 172.16.1.4 any route-map zee permit 10 match ip address test_PT set ip next-hop 221.xx.xx.xx ! route-map zee permit 20 match ip address test_SUPER set ip next-hop 203.xx.xx.xx ! route-map zee deny 30 Which exact IOS are you using ? Hi Shaikh, I have checked the configuration and it looks correct and can you please send the output of show route-map zee ? This document was generated from the following thread: PBR issue in cisco 2901 router
... View more