Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello Guys,We have some old APs 1602i devices which are giving very strange issues. We had many of them in boxes sitting in the store for a very long time. But when we tried to check a few found interesting fact that those APs stuck at boot Loading "...
update: I was on the console for more than 5 hours and the result was same. I left the AP in its state untouched overnight. I was only able to look at it after like 10 hours later. And voila everything is back to normal. The AP was up for 18 hours+ i...
So what we did is,Connected the AP to 3850 switch and a laptop is connected on the same switch (only these two devices on the isolated switch)The laptop was given an IP 10.0.0.2/24. TFTP was run on this laptop.The AP was booted while keeping the MODE...
I did the conversion using the information from the link as pointed in that post. I am sure we are missing something. But what !!!!!https://mrncciew.com/2012/10/20/lightweight-to-autonomous-conversion/https://mrncciew.com/2013/12/13/ap-conversion-usi...
Thank you Marce for the response.We know these are obsolete and are in the process to replace.Lets leave the console for the time being. Once I configure after the first flash, and write the configuration to flash and reboot, why the configs are not ...