About jwillman

jwillman · 11-26-2004

I have a strange problem with all catalysts (2948g's, 5500's) on our network. We just moved to an ACS for RADIUS authentication to these switches so I used Ciscoworks to push out the config changes to the switches (all it did was to change the IP add...

jwillman · 12-17-2004

Turns out this is normal behavior in that Cisco did not write exec authorization into the CATOS. To get around not having exec authorization you have to enable service-type as 'administrative' on the ACS which results in the straight-to-enable scenar...

jwillman · 12-02-2004

No, they are different. I've had to open a case with TAC on this. It's strange.....when I change the RADIUS config to point back to the old Microsoft authentication server it works properly but change it again to point to the ACS and boom...straight ...

Member Since	‎11-26-2004 09:08 AM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	3

User Statistics

User Activity

Catalyst login issue

Re: Catalyst login issue

Re: Catalyst login issue