Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I'm having a problem with our new 1841 routers bypassing the privileged Exec authentication on the initial login. (IOS 12.4(2)T and 12.3(11)T3 w/ACS Ver 3.2(2) Build 5)The following commands work in our other routers. aaa authentication enable defa...
Rick,Problem resolved!!! You led me to the problem. On the vty lines "Priviledge level 15" was configured. Once I removed this, the login worked as desired.Thank you for your patience and help.Bryan
Rick,I'm not allowed to post the full config but here is the AAA portion. But this is the portion from the 1841. We cut and pasted this from a working router. We are using (C1841-ENTBASE-M), Version 12.4(2)T, but we also had the same problem with 1...
Hi Rick,Thanks for your response. The problem is that I don't want users to go directly to privilege mode. Users need to be authenticated first. In our case the privilege authentication requires a SecureID token.In general, the user logon the the r...
