Hello all, I want to install a new IOS on ASR 9001. I try to install it as below but it's not working. Currently it's running 6.5.3 with the below packages . Anyone can help please ? Active Packages:disk0:asr9k-mini-px-6.1.4disk0:asr9k-k9sec-px-6.1.4...
That definetly works like magic. Thanks smilstea and thanks for every one from Cisco and outside too. This has been a wonderfull experince and I definely recommend and I would say way better then Cisco TAC. Enjoy a lovely weekend beautiful team.
Hello Tkarnani, Thanks alot for the information that saved my day and resolved the issue. This is very helpfull. Thanks very much dear. Now the last step is to move from 5.3.2 to 6.2.3 could you help with it : Here is the error message I get : Insta...
ok I have manged to solve the last issue and add the required packages, now the error I get when I try to activate the packages is as below : RP/0/RSP0/CPU0:ASR9001_CLS_01(admin)#install activate *Thu Jan 30 04:56:46.246 UTCInstall operation 108 '(...
Hello Again , I try to fix the issue by folowing the error msg and try to resolve. I try to install the ASR9K-iosxr-px-5.3.4-bridge_smus.tar which the router is asking for as below my logs. RP/0/RSP0/CPU0:ASR9001_CLS_01(admin)#install add disk1:/ASR...
I also confirm I do have the 4.3.2 CSCut52232 as below :RP/0/RSP0/CPU0:ASR9001_CLS_01#sh install sumThu Jan 30 02:20:17.071 UTCDefault Profile:SDRs:OwnerActive Packages:disk0:asr9k-mini-px-4.3.2disk0:asr9k-doc-px-4.3.2disk0:asr9k-mcast-px-4.3.2disk0:...
