About sbantz007

sbantz007 · 12-16-2004

I have set up a firewall to firewall vpn with a vendor client. It allows access to the IP address of one workstation (192.168.3.31) on our private network. The tunnel negotiates fine. The problem I am having is, the workstation can no longer brows...

sbantz007 · 12-17-2004

Thanks. I'll read through those documents. I appreciate your input.

sbantz007 · 12-17-2004

:)I'm only doing it that way because that is the information the vendor gave me. I guess that they assign private IP's for use in VPN configs since they have to connect to a wide variety of clients and many have similar private network addressing. ...

sbantz007 · 12-17-2004

I am not sure if this is your problem, but it looks like you need to make use of the split-tunnel command in conjuction with an access-list.access-list splitTunnelAcl permit ip 192.168.21.0 255.255.255.0 anyvpdn group 1 split-tunnel splitTunnelAcl

sbantz007 · 12-17-2004

Thanks for the replies. Here is a complete pix config with things spoofed to protect the innocent. :) Bear in mind, the two fw to fw vpns that I am having trouble with are the ones involved with the access-lists idx and idx2. If you look at the st...

Member Since	‎12-16-2004 09:26 AM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	5

User Statistics

User Activity

PIX 515- after fw2fw vpn, client can't browse Internet

Re: PIX 515- after fw2fw vpn, client can't browse Internet

Re: PIX 515- after fw2fw vpn, client can't browse Internet

Re: VPN Problems

Re: PIX 515- after fw2fw vpn, client can't browse Internet