Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am running WLC 4402 and 1252 AP's using 802.11a(n) and 802.11g(n) simultanously. I am seeing that when I associate to certain AP's I will be associated on 802.11a my RSSI is good but my throughput is around 13.5. I can not function when I have this...
I have 2 AP's that I seem to be having somekind of issue with. I can be associated to one AP and as I move close to the other, I never change association. I can be stand 5 feet from this AP and still not associate to it. If I disable and re-enable my...
Does anyone know how well MAC's work with Cisco AP's. Second, the issue I am having is that the EAP authentication method regardless of using LEAP, EAP-FAST, or MD5 continously flaps on the auth for this user. Our AP's hands off the authentication to...
We run Cisco 1121G's autonomous AP's with WPA enterprise. We also run 7920's using WPA enterprise with no issues. However, the 7921G's drop periodically and while roaming. The phones are set to run on seperate VLAN from data. Does anyone know of bug ...
It appears that this in fact may be the case. It takes about 10 to 15 feet past the second AP before my client will roam to the next AP. I agree the power is not the only factor even though it did help to a certain degree. I am considering removing ...
Every wireless card is different so I'm not sure if there is or not. I was hoping that there would be a way that the controller could tell a client to start looking for a better RSSI after a certain threshold. However, I am having trouble similar to...
Thank you for the reply. I have been adjusting the power settings and that seems to have helped to some degree. I am going to continue this approach. It seems to me that the Dynamic Power Control adjustments are not functioning as I would expect them...
Justin, thanks for the information. That at least gives me some additional things to try. When I get this figured out I will do a posting. Thanks again.
