About theprivateit

theprivateit · 12-30-2015

So I get a call from a client that they have no internet/networking. Their router, a Cisco RV042 powers up but only 2 lights blink...the SYSTEM and DIAG lights. No other lights, regardless of what I do don't work. Can't access it. Held down the reset...

theprivateit · 04-06-2015

I have a Linksys Rv042 Router. Have Port Forwarding enabled for the typical ports and they work fine. Recently, we purchased a Cloud NAS and I assigned it an local ip address of 192.168.0.110. the device default port for Cloud function is 50500. Crea...

theprivateit · 04-14-2015

I found the issue, a mis-configured Wireless Bridge. Now that is fixed, the setup completed successfully and the port now shows open. However, In using the LenovoEMC Storage Manager, I type in the Cloud name, it thinks, then asks for a username and p...

theprivateit · 04-10-2015

I tried what you suggested. Installed RJL on a pc at the office behind the firewall, put in 50500, changed the Router Forward to that PC and yes, from the outside it says that port is open. When I change the port forwarding back to the IP address of ...

Member Since	‎04-06-2015 05:33 PM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	4

User Statistics

User Activity

RV042 Router blinking

RV042 Port Forwarding Not working

I found the issue, a mis

I tried what you suggested.