Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi, On a WLC 8510 - 8.5.171.0 - we have several clients that are sometimes unable to authenticate properly against a radius server. We have multiple WLANs with 802.1x and CCKM enabled and clients logs in SSIDs with username and password. WLAN config...
We only have one WLC. Some APs may not be supported because, a few weeks ago, we upgraded the WLC to 8.5.171, Cisco recommended version for 8510 platform. We have to disconnect these unsupported APs Thanks for your reply
Hi, We will test it by disabling that feature. We know that issue that there are APs that are not supported but this is not the issue we are facing. I have been reading bugs you sent me but I cannot relate it to the following event: *Dot1x_NW_MsgTask...
Hi, Does anyone know the reason for these events? *Dot1x_NW_MsgTask_3: Nov 25 16:31:32.312: %DOT1X-3-AUTHKEY_TX_TRANS_ERR: [PA]1x_kxsm.c:130 Authentication state transition to state 0 failed; port status 0, key available 1, key tx enabled 1 Regards
