Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
As i have mentioned earlier i have a 1700 as hub router and 837 as spokes with dynamic adsl connexion.All is working like a charm by i am unable to communicate beetwen spokes, i have droped my PIX506 for a 1700 for that purpose but it is not working ...
We have a main site with a Pix 506 and an fixed IP, 3 branch offices are connected via internet with that PIX in Ipsec with 837 routers in each branch office.Each branch office is on a different subnet and is working like a charm, everybody can get ...
Here is on of the spokes config And here one of the 837 config version 12.3!!logging buffered 5000 debuggingno logging consoleno logging monitorip subnet-zeroip dhcp excluded-address 10.10.12.240 10.10.12.255ip dhcp excluded-address 10.10.12.1 10.10...
The spokes are not communicating each others I supose that i have missed something here is the hub 1710 config sh confUsing 2844 out of 29688 bytes!version 12.3service timestamps debug datetime msecservice timestamps log datetime msecservice password...
Thanks, I have just ordered a 1712 for that purpose to our volume reseller. As it is equipped with VPN hardware, I think it will be enough and may be more appropriate than a 837. For a little time i had looked for a 2611 but our branch offices have 2...
