Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
To allow multiple external numbers to call on different lines on the same phone, is there a way to assigned different users to each line on the phone? I know how to do this on a uc500 but I am a little lost with how to do this on a uc320?
I am currently in the process of configuring a new uc320 + Mediatrix 4402, I am able to dial to the system and it goes through to the correct hunt group etc... But when I try to make an outbound call I am receiving "Internal Server Error" on the hand...
As this was the first setup we have done with a new ISDN service (normally replacing older systems or setting up VOIP systems) I was unaware that incoming CLID was not a standard feature of a Telstra ISDN service (I should have known better, they wil...
I will login later today and get a screen shot for you, when I was setting up the original site I was unable to get it working with point to multipoint and when I was talking to the Telstra technician he advised me that point to point is the correct ...
I have it set as point to point, and all incoming and outgoing calls are working correctly. I believe this to be the correct setup for any phone system using an ISDN line. The only issue I am having is that it is not showing the incoming caller detai...
Not sure if I should start a new thread for this, but we are having an issue where all incoming calls via the ISDN lines are showing as "anonymous" on the handsets, I have run syslog on the Mediatrix when completing an incoming call, and the only rel...
Hello Sascha,On the interface configuration page of the Mediatrix box, se the maximum active calls to how ever many lines you have avalible… eg isdn2 – set maximum active calls to 2.Thanks,Matthew Martin | Network Support Engineer | Stellar Systems P...
