Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,
looking for the AP3802i which can be configured as autonomous AP (flashing -w7- Image instead of -w8-. Is this still possible?
While reading data sheet, I've found the order-option "C" at the end of the product-number.
EG: AP3802-E-K9 and AP38...
Hi,i have a problem with Cisco WLC 2106 (SW: 7.0.98.0) and LAP1262.The client roams to new AP, associates with the new AP and authentication (WPA2 with EAP-TLS) runs fine until WPA2 key exchange. The first WPA2-Key-paket from AP (1 / 4) is sent twice...
Hello there,we have a Cisco 2106 WLC with software version 5.1.151.0 and 2 LAP1252.Everything is enabled for 802.11n, an Intel 4965 client is connecting correctly, shows that 300 mbit per second. But the real throughput (with the iperf-tool) is just ...
Well, actually i don't know. But it also doesn't seem to be the problem. The contents of those two frames I've posted above are the same, just one is encapsulated.
Yes, I solved it. earlier i only got about 70mbit/s. now, with more parallel data-streams, i achiev about 140 mbit/s.i have 2 intel 4965 and 1 braodcom **** (don't know the model right now) integrated in laptops. during the my tests i had to upgrade ...
i have upgraded to 6.x and also tested with a broadcom card. now works fine. i just need to make several parallel connections with iperf for example. FTP transfer is done with around 100 mbit/s. that's what i want.
