Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We have a VPN concentrator 3020 with several 831s connecting to it. I want PCs at each site to resolve our email server's name using our internal DNS servers, not public ones provided by the ISP. I want each 831 to route Internet traffic straight out...
I have a Cisco 831 config which was created by a consultant for VPN connections to our 3020s. This config was tested behind 2 different cable modems/routers and worked.I put the same config on another 831 and tried it behind my DSL at home but the 83...
I am trying to configure a SOHO 91 to set up a VPN tunnel to my PIX 515 using ezVPN.We will be deploying these routers to our retail stores so I am looking for a somewhat generic configuration which can be plugged in behind any ISP's broadband router...
I am setting up a new branch office with a 1720 for site-to-site VPN to our PIX. I copied the 1720's config from another 1720 I set up a couple of years ago which works fine. I added the necessary lines to the PIX by copying them from the sections fo...
We have had PPTP working for several months on a PIX 515 pair up until last Wednesday. Since that time no one has been able to connect via PPTP. Cisco VPN 3.x clients are working OK. As far as I can see, no changes have been made to the PIX config in...
I tried setting this up, but it didn't seem to work. Is there some config on the 831 req'd to use this? If I use "import all" under the dhcp section on the 831, the DNS servers are listed with the ISP's first, then the internal ones.
Did you ever find a solution to this problem? I am setting up Cisco 831s with EzVPN to our VPN 3020 concentrators, but have not been able to get the remote sites to show up in NNM.Thanks for any help you can provide,Dean
Since this is for VPN, I set the DSL router to bridge and tried to reconfigure the 831 to do the PPPoE authentication but don't see an example of how to do that. Any help?TIA,Dean
First, could you send me details on how you set up the SOHO 91s? I am trying to do the same thing, but cannot get it to work.In answer to your question, we have considered this same issue. We plan to require home users to run the VPN client on the PC...
