Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All,
I hope we are doing well.
I have issue with cisco AP 9136i always appears macflapp during connected in two different switches (non LAG). we are already check the configuration and the speed status is normal, but some time these port appears m...
Dear Tim Cisco I Have a cisco prime with version 3.7.1. I see on alarms and events option there are setting of alert will be sent to email in every 30 minutes (i setting 30 mins) until the cases is solved. So, i want to setting the email notification...
Hi @Rich R
So you mean it's mac flapp is normal condition with our Topology using AP 9136 right? i just worry with these situation make a traffic distruption
Hi @Leo Laohoo
Yes agree, if port active AP failure, the traffic will move to secondary port. But our case, no failure in port active or standby and we are see any macflapp. I attached the topology our conditions.
Thank You
