Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I set up very simple network. The first link was a point to point link with the address 10.0.0.0/30. I then had a link with 3 devices so used the subnet 10.0.0.8/29. Two routers could then ping the third and the third could ping them, but they couldn...
A default route shouldn't be needed to communicate with a route on the same subnet though correct? The router 10.0.0.9 can ping 10.0.0.9 but not 10.0.0.11 even though they are both connected to the same switch.
Hi Thank you for the response. The routers in question are all in the same subnet. Both Routers 3 and 4 can ping router 2. Router 2 can ping 3 and 4. However, router 3 and 4 cannot ping each other. Ping from router 3 to 4: Reply to request 0 from 10....
Hi Thank you for the response.
The routers in question are all in the same subnet. Both Routers 3 and 4 can ping router 2. Router 2 can ping 3 and 4.
However, router 3 and 4 cannot ping each other.
Ping from router 3 to 4:
Reply to request 0 f...
