Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I'm having issues with my networks not being able to resolve websites. I'm trying to configure DNS servers on internal segments without putting them on the public network. So basically, port forwarding ideally, I would like to have one DNS server in ...
Hey Guys,I've been banging my head against the wall for a few days, so I figured I'd ask the experts.I currently have an issue where I can't connect to subnets on the other side of a L3 switch it is a SG300 updated to the latest firmware. From the sw...
Hey guys I'm having an issue where the traffic flow gets dropped to secondary Load Balancer upstream to the LAN here is my config, am I missing something? I also attached a network diagram for reference to what I am trying to get accomplished. Any su...
DNS request timed outDefault Server Unknown#do ping google.comPinging google.com (142.250.217.206) with 18 bytes of data:PING: no reply from 142.250.217.206PING: timeoutPING: no reply from 142.250.217.206PING: timeoutPING: no reply from 142.250.217.2...
I'm basically asking what is "nat (inside,outside) after-auto source dynamic any interface" equivalent command on this router? Am I missing something? Thank you for your help.
192.168.0.83 is on one INSIDE LAN10.4.43.83 is on one INSIDE LAN192.168.1.1 is the outside router on the WAN network.I can ping outside via ip addresses just not FQDN. I am assuming the inside DNS servers aren't receiving the port 53 request.
