About ITmike

ITmike · 10-22-2018

I have a switch that has several Vlan's set up on it.One of the Vlan's does not touch our network and I need to take 2 ip addresses from that Vlan and put them on another Vlan in the same switch. Vlan20 - 192.168.1.1 - 192.168.1.255Vlan30 - I would l...

ITmike · 10-22-2018

The configuration on this port is the followinginterface GigabitEthernet1/0/28 description WAP NW switchport trunk native vlan 40 switchport trunk allowed vlan 1,5,20,40 switchport mode trunk!Vlan 40 is a separate ip addresses structure that is on ou...

ITmike · 10-22-2018

The easiest way to configure 2 ports in vlan 20 and assign the 2 IPs to it and make sure it is excluded from the DHCP scope. so I have one AP to one port, so can I assign an Ip scope to that port? Vlan 30 is most likely in a different subnet. S...

ITmike · 10-22-2018

Yea I was afraid of that. will have to try your first suggestion. Thanks

ITmike · 10-22-2018

Well I was thinking something like thisinterface Vlan20ip address 172.18.20.1 255.255.255.0ip dhcp exclude-address 172.18.20.200 172.18.20.202!interface Vlan30ip address 172.18.20.200 255.255.255.252Not sure if that will work, but I think it will.Tha...

Member Since	‎07-09-2018 12:02 PM
Date Last Visited	‎10-26-2018 12:04 AM
Posts	5

User Statistics

User Activity

Stealing ip addresses from one Vlan to another Vlan

Re: Stealing ip addresses from one Vlan to another Vlan

Re: Stealing ip addresses from one Vlan to another Vlan

Re: Stealing ip addresses from one Vlan to another Vlan

Re: Stealing ip addresses from one Vlan to another Vlan