Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hey,
Just to add to previous posts - on IOS-XE 17.15.1a, for IPv4 PBR you'll see error message when trying to attach route-map containing prefix-list in matching condition, however for IPv6 PBR you won't. IOS allows this configuration, but PBR will s...
Just to add to my previous message, I'm running also IPv6 in those VRFs and MPLS (basically my whole lab is fully IPv4/IPv6). For OSPFv3, LSAs generated by CE after VRF-leaking (I used same logic as for IPv4 described above) had DN-bit set, hence the...
Hello,
Even though this is old topic, I decided to post the solution since I've just worked myself out of the same problem. Based on the logic for EIGRP Inter-VRF leaking:
1) Configure VRFs and OSPF processes.
vrf definition LAN-SERVICErd 3:3address...
Hey,
As per my understanding you're trying to send SYSLOGs to the external SYSLOG server. Questions that come to my mind:
1) Is there end-to-end connectivity between ASA(s) and SYSLOG server?
2) Can the traffic be policy-dropped (f.e. ACL, another...
Hey,
I believe the easiest way is to go with option 2. From what I saw, those 2811 are having USB ports. You can utilize USB stick formatted to FAT32 (or FAT16) and just use copy command to move the IOS between these two.
TFTP is also an option, ...
