About v-naughton

v-naughton · 03-15-2006

Hi,We have an Outlook 2003 clients that connect to an exchange server through the PIX but are experiencing 40 to 50 sec delay in being prompted for authentication. Firewall rules allow the client out for any connection to exchange. Clients function f...

v-naughton · 11-17-2005

We have migrated from using a VPN concentrator to an ASA box because the concentrator would not store the 4096 bit key of the root CA. The ASA does not need to have the full chain (trustpoints) so we are successfull using the ASA for remote access VP...

v-naughton · 10-27-2005

Hi,I am trying to set up\a remote access tunnell with an ASA that is natted behind a Checkpoint firewall. Shared key works perfectly but when I try it with certificates the client drops the connection because;482 16:30:34.581 10/27/05 Sev=Warnin...

v-naughton · 10-19-2005

Quick question. I am configuring VPN clients on an ASA box and for the vpn pool I would like to know does the ASA box use its own address on behalf of the clients for communication with internal networks or do I need to add a route to the vpn pool on...

v-naughton · 08-22-2005

I need to configure a remote access VPN on a Cisco PIX and allow the Cisco VPN clients using that pool to use another site to site vpn on the same PIX. Is this possible on ver 6.3. I know the vpn Concentrator can do it but what about the PIX. any tho...

v-naughton · 03-16-2006

Thanks Aashish,Will check those. The Model is a PIX515E. It is set up in failover (using the failover cable rather than LAN failover....waiting to get new nics in the PIX's).....it is running version 7.1......ThanksVincent

v-naughton · 11-30-2005

I have set this up for hub and spoke vpn clients and it works like a charm. I used the same-security-traffic perpit intra-interface. The key here is intra-interface which specifies ipsec traffic, if you use inter-interface it allows communication bet...

v-naughton · 10-27-2005

Thanks Wyatt that worked.....I should have remembered that I had set isakmp identity address for shared key access.

v-naughton · 10-19-2005

Jack thanks for that.So you are saying is that the internal networks only need a route to my ASA (and my ASA needs static routes to all my Internal networks).This is the case I can ping anything on the internal network from the ASA.My vpn client conf...

v-naughton · 10-19-2005

This is usually caused when clients are behind 'old' adsl boxes that do not allow vpn passthrough...the first person succeeds in bringing up a vpn connnection but if anyone else wants to connect the first person is required to disconnect...just purch...

Member Since	‎03-31-2005 06:48 AM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	12

User Statistics

User Activity

Outlook 2003 Client to Exchange through Pix 7.1

Browser proxy configuration for ASA

problem with certificates on ASA

Is the vpn pool proxied

Reverse route injection on PIX

Re: Outlook 2003 Client to Exchange through Pix 7.1

Re: PIX 7.0(4) Hairpinning or routing through the same interface

Re: problem with certificates on ASA

Re: Is the vpn pool proxied

Re: VPN Concentrator