Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello! I am trying to vlan a 3548 switch so that I can put all my public-facing devices (isp router, firewall and ASA) on this switch. I cannot get the isp device to come up on the switch. I have disabled portfast, set duplex settings to 100 full,...
We are still fine-tuning CSA prior to a rollout, and are having issues with CSA blocking all access to the registry on our servers. This is a learning curve for us, and we are still trying to determine why the machine account is modifying the regist...
I am trying to move a remote site's vpn connection from our pix to our concentrator, but it doesn't appear that the concentrator allows for a 0.0.0.0 peer address. How does the concentrator address pix devices that use PPPoE?Thanks for any and all a...
Giuseppe,Yes, the hub is in line with all the public facing devices, and the switch is just the local lan. This is for a remote site (UK) so the design is far from optimal. Thanks for your responses and ideas!Thanks,Suzanne
Giuseppe,I don't think that's it as I was able to work around the issue by installing a dumb hub, and the line protocol came right up. The problem is stictly with the line protocol I think.Thanks,Suzanne
Jon,Thanks for the response, I have tried a different port in that vlan I created (none of the 3 work) and every premutation of duplex setting. no link light at all. I have the site currently connectied directly into the firewall, and that works (a...
I don't think I explained myself well. What I need is something like this http://www.cisco.com/en/US/customer/products/hw/vpndevc/ps2284/products_configuration_example09186a00801dd672.shtml but that allows you to do so with a lan to lan connection, ...
