Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We received a question from a customer asking about support for a feature called Asynchronous Port Channel and if it was supported in the GA code. virtual Port Channel Host Mode (vPC-HM), which was known as Asynchronous Port Channel during the Nexus ...
Posting this question on behalf of one of our customers:When creating a profile, is that profile really (!) on all VEMs?PF> No, it exists on the VSM and the rules contained in the Port Profile are pushed down to the VEM as a new VM is created in vCen...
Hi Jesper,The short answer is yes, and you will actually see this supported first in Cisco UCS. It will also be available on the Nexus 5000 in the 2010 timeframe. That is about all I can say at this point. Thanks, pf
Nope,You can configure VPC on the upstream switch and then just configure the server NICs as 1 port channel. This applies to both the Nexus 5000 and the Nexus 7000.Thanks,pf
