Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Recently started experiencing an issue with the radio transmit power on our MR57s. For our environment, and based on our experience with prior Meraki APs (MR34s, MR52s), we saw anything from 26-30dBm transmit powers (as shown on Wireless -> Configur...
I should add, looking at "Timeline", 5Ghz seems to be a problem for many of the impacted devices... SNR is often <15dB before these devices roam. Again, never used to see such low SNRs prior to the lower Transmit Powers.
Thanks for this! I'll try and respond to each of your questions....How closely have you looked at the clients? Is it all clients with the issue, or only Windows machines. Is it all Windows machines, or only machines with a WiFi chipset by a partic...
Same single RF profile is being applied to all AP radios. I've set the target transmit power to 30dBm now, but at the beginning of all this is was for years set to 26-30. However, it never goes above 23dBm....
To add, I've reviewed the information at https://documentation.meraki.com/MR/Radio_Settings/RF_Profiles#Max_Radio_Power_Limitations, and I don't believe any of it would explain this situation... but open to feedback. Regulatory Domain - I’m in FCC/U...
