Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,I have 1 problem in configuration which normally worked on PIX 6.3(1) but showing Warning message during implementation on ASA.I have 2 statics:static (dmz,outside) tcp XXX.XXX.XXX.XXX 8080 YYY.YYY.YYY.YYY 8080 netmask 255.255.255.255 0 0 stati...
Hello experts,I have a PIX 6.3(1)I have a problem with permitting access to specific ports (443) and blocking all others for client using Cisco VPN client.i tried to manage it via access-list for nonat traffic, after i tried to manage it via split-tu...
Hi all,I am using cisco pix 6.3(1).I need to provide remote access vpn to one company.I found that when i specifiying specific port for NO NAT traffic all ports becoming blocked. I also tried to implement this via split-tunnel but found that it's ig...
Hello all,I got 2 links from different ISPs with different public IPs ranges. Both links connected to router 2821XM via Serial interfaces. Both router ethernet interfaces assigned IP public IP addresses (ISP1 and IPS2 respectively). Default route on...
Hello all,I am running CiscoPIX 515E-UR ver.6.3(1) with 2 outside Interfaces with different public IPs from 2 ISPIs there is any possibility to create :route (outside) 0.0.0.0 0.0.0.0 Router ISP1 1route (outintf) 0.0.0.0 0.0.0.0 Router ISP2 1for traf...
Yes, sysopt connection permit-ipsec existing in config.With presented configuration remote Access VPN working. But for all ports.I would like to permit only 443, all others should be blocked.
Hi Prashanth,show version will dispaly all your interfaces and MAC addresses of them.I am not sure about PDM, but there is in the Tools something like Command. You can enter show version there.
Okthis is my router config (sensitive and irrelevant data omitted)Building configuration...Current configuration : 5367 bytes!version 12.3service nagleno service padservice tcp-keepalives-inservice tcp-keepalives-outservice timestamps debug datetime ...
Hi alekseev,I tried waht suggested me. Please note that now i see sho xlate global ISP2_IP correct xlates. But i don't have any connection to outside world, even to border router telnet to any interface. Access-list applied to inside interface permit...
