About o.panchuk

o.panchuk · 01-11-2016

asr1000-rp2 after upgrade of rommon from 15.2(1r)S to 15.3(1r)S following issue persists: Initializing Hardware ... FPGA load not complete !!! Calculating the ROMMON CRC ... CRC is correct System Bootstrap, Version 15.3(1r)S, RELEASE SOFTWARE (fc1...

o.panchuk · 09-25-2018

AFAIK asr1000-rp2 8GB + ESP20 is capable of running at least 3 ipv4 full-views + 3 ipv6 with different peers.

o.panchuk · 09-21-2018

As modern full-view size is around 700k for IPv4 and 60k for IPv6 so following routers will work. ASR1000 series with RP1 can handle it: ● Scalability up to 1,000,000 IPv4 routes or 500,000 IPv6 routes ● BGP RR Scalability up to 5,000,000 IPv4 ro...

o.panchuk · 01-29-2016

Hi, 3.8 XE is an old image. When booting with new one - the issue is the same. No, netflow was not enabled - just default config. Thanks,

o.panchuk · 01-29-2016

Tested it all today. Issue is definitely somewhere in RP. Just left to determine if it software or hardware issue.

o.panchuk · 01-12-2016

Thanks Philip, Another one idea from local Cisco representative - failed ESP. He found that Linux kernel could not load or initialise esi_conn kernel module, then we reinstalled all modules into new chassis(to check if there is no something in betwee...

Member Since	‎05-09-2005 12:08 AM
Date Last Visited	‎06-07-2023 12:03 AM
Posts	8

User Statistics

User Activity

asr1000-rp2 "FPGA load not complete" and other issues after rommon upgrade

Re: Router recommendations for runing two full Internet routing tables

Re: Router recommendations for runing two full Internet routing tables

Hi,

Tested it all today. Issue is

Thanks Philip,