Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,
We are currently working on a migration to the PSTN connection from PRI to SIP and we have an issue with the T.38 usage for fax transmission. The infrastructure is :
Telco - SIP Trunk (T.38 supported) - CUBE - SIP Trunk (T.38 supported) - CUCM...
Hi Alfredo,
I received yesterday the "short" sas cable by Cisco and it worked! In fact, short cables are only 12cm shorter than long sas cables :-)
So if you don't find long cable on internet, you may buy short one.
Regards,Stéphane
Hello Alfredo,
I have the LSI MegaRaid 9261-8i with SAS Extender (max 8 SAS disks).With standard SAS Cable the drives are not reconized but with Cisco cable everything is fine.I checked the pinout on the cable and there is some differences "like cros...
Hello Alfredo,
Last year, I had this problem too and tried to use a standard SFF-8087 / SFF-8087 with the SAS Extender, unfortunately the pinout is not the same and drives are not detected by the Raid controler.
Today, I have two other C210 M2 UCS an...
Hi Martin,Thanks for your help, I tried to clean up the configuration of the CUBE and this helps me to find the real issue with T.38 SIP INVITE negociation (see last post about 488 Not Acceptable Media)Thanks,Stéphane
