Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a web server in a DMZ. We can access web pages on the web server from the internal net and the web server can see a database server on the internal side. The web server can ping the DC, but windows authentication does not work. I need to be ab...
I have several users that can connect to our VPN ussing IPSec on a 5505. I have one user that can connect, but cannot see the internal network. This user is using DSL with a speedstream 4100. However, I have another user with the same setup that can ...
I receive this error message in ASDM when a VPN client tries to connect. Group = DefaultRAGroup, IP = x.x.x.x, Error: Unable to remove PeerTblEntryGroup = DefaultRAGroup, IP = x.x.x.x, Removing peer from peer table failed, no match! I have created a ...
is it possible to setup two ASA's behind a cable modem? currently i have the modem, then a switch, then the two ASA's. one is configured with with pulic ip x.x.x.79 and the other is congifured with public ip x.x.x.127. however, only one will work at ...
ASA 5505. Need to setup remote access for home users, and really need some help deciding which method to implement. CSD, WebVPN, Citrix, Cisco VPN client??? With 25 IPSec VPN peers and 2 SSL VPN peers, are there limitations to which method I choose?T...
now i have setup antoher user, and the same thing happens. connection established, but no access to internal net. i have three users who can access internal net and two that cannot. can you please take a look at my config and see if there is anything...
using split tunneling. can't get local lan access to work on client side even if checked on the transport tab. it only shows 0.0.0.0 0.0.0.0 for network/subnet under secured routes. i will check the route print stats.same os and patch levels.Thanks,b...
