About treborvfr

treborvfr · 06-06-2005

Hi,I'm trying to use a Cisco 2500 as a very simple bridge to get a 2MB ADSL connection to a remote location. However I am having problems getting the two 2500's to talk to each other.They are connected via a Nokia multiplexer using an X21 connection...

treborvfr · 06-10-2005

Rick,At last I managed to get someone at the far end to check out the cabling. It turned out that the Cisco 60 to 15 pin cable was faulty. It is now all up and running and I am a happy bunny!Thanks very much for all your help Rick, have a virtual b...

treborvfr · 06-08-2005

Cheers Rick,I'll get someone to check out the cables at the far end tomorrow and let you know how we get on.ThanksBob

treborvfr · 06-08-2005

Rick,I managed to get someone at the remote end to run the configs of, see attached.I got him to switch on console debug and interestingly the line protocol is permanently down there. I placed a short DTE loopback on the Nokia mux at the far end and...

treborvfr · 06-08-2005

Rick,I managed to get someone at the remote end to run the configs of, see attached.I got him to switch on console debug and interestingly the line protocol is permanently down there. I placed a short DTE loopback on the Nokia mux at the far end and...

treborvfr · 06-07-2005

Hi again Rick,Not sure what you mean by "the interface config", do you mean 'show tech-support'?Bob

Member Since	‎06-06-2005 09:31 AM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	9

User Statistics

User Activity

Using a Cisco 2500 as a bridge

Re: Using a Cisco 2500 as a bridge

Re: Using a Cisco 2500 as a bridge

Re: Using a Cisco 2500 as a bridge

Re: Using a Cisco 2500 as a bridge

Re: Using a Cisco 2500 as a bridge