Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
My PIX 501 has been running like a champ for the last 6 months but today when I came home, all of the lights on the switch portion were off. The power light and the light for the 0 port were still lit up but none of the lights for the 1-4 ports were ...
Here you go:show interface interface ethernet0 "outside" is up, line protocol is down Hardware is i82559 ethernet, address is 0013.c365.defb MTU 1500 bytes, BW 10000 Kbit half duplex 0 packets input, 0 bytes, 0 no buffer Received 0 broadcasts, ...
Here's the info returned when I run 'show conf'show conf : Saved : Written by enable_15 at 20:34:53.129 UTC Tue Nov 1 2005PIX Version 6.3(4)interface ethernet0 autointerface ethernet1 100fullnameif ethernet0 outside security0nameif ethernet1 inside s...
I'm still having problems with the switch ports. The PIX is getting power and the power light is lit. I can also use the console port and Port 0 will also work and light up, but none of the ports 1-4 appear to be working at all. Any help would be a...
