Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,I am attempting to apply a simple CBWFQ/LLQ policy for voice traffic over an ATM UBR configured as a subinterface. When I apply the service-policy to the PVC on the subinterface it doesn't stick. A warning is logged saying that there is no av...
If you are referring to the fan assembly on the front (faceplate) it can be hot swapped. You will see events logged on the console when you remove the old one but it is fine.Jim
Hello,The link I provided was just a configuration example. You would need to tweak it to fit what you have. In the example they had one interface with a static IP and the other acquired via DHCP. From your initial config I see you are static on b...
Giuseppe,Correct me if I am wrong, but I wouldn't want to apply it to the physical interface becase of the other ~20 sub interfaces that are not UBR's and need/have thier own QoS service-policy.I am using a 3745 with 12.4(15)T6 Advanced IP Services.T...
Hello,I would recommend posting new questions as a new discussion. It looks like you are almost there. Check out the following documentation. I think your route-maps need a little work.http://www.cisco.com/en/US/tech/tk648/tk361/technologies_confi...
