Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have an ASA 5520 and I am having trouble getting the AnyConnect VPN authentication timeout feature to work properly. I thought I did have it working a couple of months ago, but right now it is not giving me more than the default 12 seconds. I have ...
Yep. I removed them from my machine. I also fixed the profile Iw as trying to use. I misconfigured the host info, so it was unable to connect on that profile. I am wondering if it jumps to the next profile in the folder to see if that works, which is...
I have checked and double checked the settings and the proper client profile is chosen. When AnyConnect talks to the firewall though, it is not updating the profiles. Either the client is not trying to download them, or the ASA is sending the wrong i...
I think I am now talking to myself, but hopefully this helps someone else someday! The profiles located in C:\ProgramData\Cisco\Cisco AnyConnect VPN Client\Profile were not updated. The client was using both the wrong profile AND an outdated profile....
I looked in the event viewer on the client and anyconnect reports that the timeout of 180s is beyond the allowed range, so it is defaulting to the 12 seconds. I am not sure where it is getting the 180s from, as I do not have that set in the client pr...
I have been setting it in the client profile. I see that the server timeout can be set in the AAA server group, but my issue is that the AnyConnect client times out before th second part of the two factor authentication can occur.
