About matus.petrulak

matus.petrulak · 02-04-2008

hi all,is there a posibility on 2960 or 3560 to limit number od BPDUs? for example to 100/s. Because when network loop occur the switch is bombarded with BPDUs and the swich has to process all of them by CPU.thanks a lot

matus.petrulak · 02-01-2008

Hello,i have the following problem and i don't know what is it related to.From time to time (usualy once in 10 minutes) all leds on all access ports changes color to amber for about 5 seconds and then back to green.Users on my network don't report ne...

matus.petrulak · 02-04-2008

Yes, your answer solved my problem. Thank you very much. Enabling bgpduguard and disabling bpdufilter works fine even if someone connects dumb switch to that port and connect one cable with both ends to that dumb switch. BPDUguard will shutdown the p...

matus.petrulak · 02-04-2008

Hello,ahoj skoro krajan :)i have bdpduguard, storm-control, udld, turned on..but... if someone plug in my cisco switch another dumb switch and makes a loop in that dumb switch... cisco is bombarded with BPDU's, UDLD's and so on. i have tried storm-co...

matus.petrulak · 01-28-2008

Hi,the show spanning-tree show whether the switch is root or not. If you want to trace root switch, just log on to any switch and in "sh spanning-tree" you will see port with "Root" role. (Root port is only one) If you won't see Root port you are at ...

Member Since	‎01-28-2008 02:15 AM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	5
Total Helpful Votes Received	5

User Statistics

User Activity

rate-limit BPDU

MST problem

Re: rate-limit BPDU

Re: rate-limit BPDU

Re: How to locate the root switch of the spanning tree?